Wind Turbines

Hadrian are the leading installer of small wind turbines in Northumberland and the North of England – we now have hundreds of installations and references. We can assess your site and estimate your payback and return on investment, we can help you through the planning stages, we can help you through the grid connection issues, and we can complete your installation. We offer the full package from planning through to 20 years of FiT income. Hadrian are approved installers of Kingspan and Tozzi Nord turbines sizes from 6kW to 60kW

Tozzi Nord TN535 10KW turbine

Winning with Wind

We are delighted to announce our appointment as exclusive distributors in the North of England of this top quality and leading performing small wind turbine. Produced since 2006 the Tozzi TN535 outperforms all of its competitors by at least 36% at a typical 5 m/s site. Built to large turbine principles and design the TN535 not only produces high energy levels, even at low wind speeds, but is aesthetically pleasing. All Tozzi turbines come with a full support package and manufacturers full 5 year warranty.

Product Brochure PDF

Tozzi Nord 10KW Specification
TN535
Nominal power	10 kW
Nominal wind speed	7.5 m/s
Cut-in speed	2.5 m/s
Cut-out speed	16 m/s
Multiplier	Belt type- ratio 1:12
Primary braking system	Blade pitch
Secondary braking system	Centrifugal brake patented
No. of blades	3
Blades material	GRP
Connection to grid	Yes
Generator type	PM synchronous
Output voltage	360 V ÷ 480 V
Output frequency	50 Hz / 60 Hz
Starting	Not assisted

Tozzi NordTN60-24 60KW turbine

Winning with Wind

The TN60-24 wind turbine offers 60 kW of high performance Italian engineering with a 3-blade upwind rotor, variable speed operation and active pitch control on a 30m tower.

Tozzi engineering prides itself on optimising energy yields even at low wind speeds. The Tozzi TN60-24 offers a hydraulic pitch system, parallel axis power transmission, yaw and pitch control, hydraulic braking system and an extensive control system.

With over 270 MW of installed electricity generation Tozzi Maxi wind plants were one of the first operators to invest in renewable technology and the only manufacturer of small scale wind turbines that can boast “intellectual property”

Product brochure PDF

Tozzi Nord 24-60KW Specification
Victory 24-60
Peak Power	60 kW
Reference Annual Energy (RAE)*	240000 kWh
Applications	Commercial- Telecoms- Public Sector-Remote Islands
Voltages Available	230V Grid Tied
Grid connection options	Three phase
Rotor	24m diameter
Blade Material	Glass reinforced polymers
Generator Type	Permanent Magnets Synchronous Generator
Tower Heights	30m
Foundation Options	Pad / Root / Rock Anchor options
Cut In Speed	2.5 m/s
Cut Out Speed	20 m/s
Warranty	5 year standard

* RAE is annual energy production at 6 m/s.

Kingspan Wind 6KW turbine

The World’s Most Popular Small Scale Wind Turbine

The KW6 wind turbine stands out from all other small scale wind turbines due to its unique blade and hinge design which allows it to regulate its rotational speed, maximising output – as the wind gets stronger the blades pitch and cone, protecting the turbine and allowing continual operation during the fiercest of storms.

Kingspan KW6 wind turbine is the result of over 30 years research and development and born from a global installed fleet size in excess of 4000 turbines.

Installed in over 60 countries and in every continent

Product Brochure PDF

KW6
Kw6
Rated Power	5. kW (1min average at 11m/s)
Peak Power	6.1kW
Reference Annual Energy (RAE)*	8949 kWh
Applications	Rural Domestic- Small Holding- Agricultural- Commercial- Telecoms- Public Sector- Remote Islands
Solutions	Grid Tied- Battery Charging- 48V DC/300V DC – Direct Heating
Voltages	Available 48V DC / 300V DC
Connection options	Single / Dual / Three phase
Architecture	Downwind- 3 Bladed- Self Regulating
Rotor	5.6m diameter- 200RPM at Rated Power. Thrust 10kN&lt
Blade Material	Glass Thermoplastic Composite
Generator Type	Brushless Direct Drive Permanent Magnet
Tower Heights	9m / 11.6m / 15m / 20m (Flange Bolted / Taper Fit Monopole – Hydraulic options available)
Foundation Options	Pad / Root / Rock Anchor options
Cut In Speed	3.5 m/s
Cut Out Speed	None – continuous operation
Survival Wind Speed	Designed to Class 1 (70m/s) Independently tested to Class 2 (59.5m/s)
Warranty	5 year standard
Cold Climate Options	Available on request

* RAE is annual energy production at 5m/s measured at 10m hub height.

Kingspan Wind 15KW turbine

The World’s Most Popular Small Scale Wind Turbine

The KW15 wind turbine offers high performance energy generation coupled with intelligent turbine control to constantly monitor the RPM and voltage. Dynamic loading is utilised to maintain the most efficient RPMin any wind speed. The KW15 offers four levels of rotor speed control to ensure responsible and efficient energy production in all wind conditions to offer you a greater return on investment.

Kingspan have over 4500 installations in over 60 countries and on every continent with the Kingspan KW15 joining as the latest addition to their portfolio.